Keihin CR spacing adjustability

[Guest]

Hey guys

Going to get a set of CR26 in the near future. The ones that Dime City provide appear to have a fixed spacing designed for the cb350/400 they sell them set up for.
Getting info on them is extremely hard - all i want to know is if anyone here knows how laterally adjustable these are? So i can match them up with my intake ports obviously

My spacings are approx 70mm-80mm-70mm between cylinders (or 2.75" - 3.15"-2.75" )

cheers!
Nik

[GregT]

All the roundslide CR's I've ever seen have at least two sets of holes in the shaft which operates the slides. Plus extra holes in the locating rails.

Even if the range of adjustment isn't quite enough. it's easy enough to make up a new shaft. I use 10mm silver steel which is soft enough to tap easily in the usual 5mm sizes.

For what it's worth I've just done the poor mans set of 24's for a CB400 - narrowed and remounted a set of Z650 carbs. Probably would have been easier to buy CR's but the owner's budget didn't allow.

[nikosg]

Thanks Greg!

I think ill get the CRs... should be a nice little upgrade for the bike.