.png "Powered by vBulletin")
I've just cleaned out my carbs and re-fitted them to find a leak from no 4 float bowl. I always thought the fuel level never came up to the gasket. Can anyone confirm this and I'll then check out float level etc. Thanks
-
-
If you have CV carbs please check the carb rebuild tutorial linked in my signature. Best to verify fuel level, not just float height.Last edited by Nessism; 10-06-2013, 11:14 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
You're right - the float valve should ensure that the fuel level stays below the gasket so either the float is sticking, float height is incorrect or the valve and / or seat is worn.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
Or the float bowl gaskets are K&L Brand.Comment
Comment