Announcement

Collapse
No announcement yet.

Cables for lower bars?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cables for lower bars?

    I just got an 85 GS450L and the guy I got it from swapped out the original bars for dirt bike bars. I've had some issues with the clutch and throttle and was told I need to get shorter cables due to the bar change. How do I figure out what the cable length should be for the bars I have on there? Or can I just adjust/rout them differently? It's my first bike so the only thing I notice is that idle will go waaaay up when you turn the bars to the right, and a few people told me the clutch lever just feels off due to the cable length.

    #2
    You really should replace them with shorter cables. I would look into Suzuki 450S or 450E cables, as OEM cables tend to be much better quality than aftermarket cables.

    Comment


      #3
      Originally posted by koolaid_kid View Post
      You really should replace them with shorter cables. I would look into Suzuki 450S or 450E cables, as OEM cables tend to be much better quality than aftermarket cables.

      Thank you! Exactly the info I need.

      Comment

      Working...
      X