.png "Powered by vBulletin")
Search must be done with SHORT keywords or phrases only..to much input and it wont compute and sends you that error report. That old thinner is putrified fuel and then there will be a black almost plastic sediment under it. It took 3 days in Acetone and scrubbing with a rod going along the bottom edges to get it all out of one tank I had. And yes that was then tanks salvation from fully rotting thru.
-
Last edited by chuck hahn; 11-20-2013, 05:12 PM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Yes, just plain rubbing alcohol drys out and flushes the last moisture out and leaves it pristine. This is how you want it if you are going to coat it. Ray"Nobody goes there anymore, it's too crowded" -Yogi Berra
GS Valve Shim Club http://www.thegsresources.com/_forum...d.php?t=122394
1978 GS1000EC Back home with DJ
1979 GS1000SN The new hope
1986 VFR700F2 RecycledComment
-
Hi,
Try searching specific sections instead of the whole forum. See this guide...Originally posted by Seaking View Post
How To Search The GSR Forum (PDF file)
Thank you for your indulgence,
BassCliffComment
-
Thanks BassCliff. Using the words "carb clean" in this forum section would give me errors, but later it started to work again. Not sure if its just a server timeout error or a referrer link error when that happens when I'm on the wireless laptop out in the garage.. The FiOp PC doesn't seem to suffer the errors. weird. Considered sorted out now.
Anyhoo, thanks for the tip!Comment
Comment