.png "Powered by vBulletin")
Hi I bought this petcock as it was listed as 44mm centres for my new fluted tank but has 3 inlets/outlets instead of my original petcock which has 2, anyone an idea if this will be ok, also it is slightly bigger.
-
-
Dont think it will fit without hitting the tops of the carbs or air box. Fit it and see first. If it fits, then add a gallon of fuel and open the tap and see what nipples the fuel flows from. Im thinking one of the bigger ones is a vacuum that goes to the carb nipple, another big one goes to the fuel tee, and the other one is a drain of some sort which can be capped off.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Ok thanks I will try this first, the only other issue is the filter on this tap is a lot wider and in the centre and the fluter tank has a smaller hole which is also off set! Any ideas?Comment
Comment