Announcement
Collapse
No announcement yet.
Very disturbing crack on carb 'to head'
Collapse
X
-
Looks like someone dropped the carbs at one point. From the photos, it looks like the boot will cover the cracks just fine.
But make sure that piece of metal isn't going to come loose. If it does, it will go into your engine and then you will have a bad day.
If you wanted to go overkill, you could patch the whole works up with JB Weld and sand/file it down to the proper profile. But probably not strictly necessary from what I see here.
Comment
-
M.Hayes.GS450TX
Originally posted by tom203 View PostYou should notify the prevention of cruelty to carb league. That's pitiful- did you buy this as a nonrunner?
Yeah it was a nonrunner from a friends dad who rode it for a couple of years until his back went out. According to him, the bike was running fine the day he just left it in his garage and threw in the towel. I'm suspecting it was the original buyer. I strongly feel it is.. not as much of a concern as I may think. that owner had EVERY oil change to major repair documented all the way from 1984 when he bought it. It was regularly maintained and routinely brought into the dealer. So I suspect that somewhere down the road it was deemed.. perhaps, "not serious."
We'll see!
Comment
Comment