.png "Powered by vBulletin")
Will someone tell me if the exhaust pipe plates ( part # 7 in parts link below) are for the two inside pipes only and not needed for the outside pipes.
-
-
I want to say it's true.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
I would agree with Nessism since it only call for 4 showen on the 2 inside pipesComment
-
Thanks! I will go with the inner only. It must be due to the inners being a fixed placement vs. the outside, which has some play.Comment
-
Inner 2 pipes only.2018 Honda Africa Twin AS
2013 DR 650 Grey, sold 1981 GS 650E Silver,
1980 GS1000ST Blue & White, X2
2012 DL650 Vstrom Foxy Orange, in storage
1981 CT110 X2 "Postie Bikes" Gone to a New Home.
2002 BMW 1150 GS Blue & White - Sold
1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
1982 BMW R100 Africa trip, Stolen - Recovered- Sold
1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,Comment
-
because the outside header pipes are removable you can slide the clamps on from the rear of header therefore the 2 half moon plates are not required the outside headers are larger where clamp bolts up to head
the inside pipes being welded on requiring these plates so the clamps can slip over the end of header then the plates are inserted to allow clamps to hold header onto the cylinder head
ozmanComment
Comment