Announcement

Collapse
No announcement yet.

VM29 smoothbores

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    VM29 smoothbores

    I'm missing a few parts on a rack.
    I need all four emulsion tubes, main jets and one fuel/air screw.
    What did these come on stock?
    Does anyone have these pieces or would anyone want this incomplete rack?
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.


    #2
    29's was after market carbs like the RS's.
    carb parts warehouse in cleveland?
    should be able to fix you up.

    Comment


      #3
      Fuel/air screws are the same as the 26's. Mains are normal round Mikuni.
      There were different emulsion tubes available in the day so I'd hope someone has old stock....

      Comment


        #4
        Z1Enterprise has most everything you need for smoothbores if you can't find it here.
        2@ \'78 GS1000

        Comment


          #5
          If you're planning on letting that incomplete rack go, I might be interested.
          Rob
          1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
          Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

          Comment

          Working...
          X