.png "Powered by vBulletin")
1/2" drive, for me, is the only size that has a socket for the rear axle nut. Beyond that it's mostly the 1/4" set and sometimes the 3/8" set as well.
-
http://img633.imageshack.us/img633/811/douMvs.jpg
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.;)
JTGS850GL aka Julius
GS Resource Greetings
-
It all depends on the sockets you have. My hodgepodge of cheap sockets are mostly 1/4" up to a certain size (14mm?) and 3/8" after that. I believe all of my deep-well impact sockets are 1/2".Comment
-
Anybody know if you can order that “special tool” for the synch screws and locknuts anymore and what it might be called to search for??Comment
-
Maybe start a new thread instead of asking in a 10 year old one would get better answers?Ron
When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!https://www.thegsresources.com/_forum/core/images/smilies/cool.png
1978 GS750E - November 2017 BOTM
1978 GS1000C - May 2021 BOTM
1982 GS1100E - April 2024 BOTM
1999 Honda GL1500SEComment
-
Just thought this one already had the relevant information. Tried searching for a post that already discussed it but didn’t know what terms to search for.Comment
-
Roger
Current rides
1983 GS 850G
1982 GS1100GK
https://visitedstatesmap.com/image/AZARCACOIDILINKSMONVNMOKTXUTWYsm.jpg Gone but not forgotten 1985 Rebel 250, 1991 XT225, 2004 KLR650, 1981 GS850G, 1982 GS1100GL, 2002 DL1000, 2005 KLR650, 2003 KLX400, 2003 FJR1300Comment
-
Motion Pro is the manufacturerOriginally posted by dgates1 View Post1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
Comment