Metal cable ties on carb air box boots

[Steve]

Thanks Steve. Those seem to be what goes on the cylinder head side of the carb. What about on the air cleaner side?

Look on the "Air Cleaner" fiche.

.

[ruler7171]

That would be the obvious next step. I have looked at the fiche on many sites, but no one has had them. I was hoping someone knew of a compatible part number for 09402-60305?

[ruler7171]

http://www.cmsnl.com/products/clamp_.../#.U7K8YpRdV8F

This is the only site that I have been able to locate that gives a superseded part number to 09402-60305. They list 09402-60208 as being compatible.

[Nessism]

$7 for a cable tie gun...http://www.harborfreight.com/adjusta...gun-67076.html

If you use quality cable ties I believe it would work fine.

[Steve]

Although the insides of the carbs are a bit different, you have BS34s, much like the 1000G.
Why not order part number 09402-62208 from the 1000G?

Parts Outlaw has them for $4.00.

.

[ruler7171]

Thanks for the help everyone

[JMHJ]

Thanks Steve. Those seem to be what goes on the cylinder head side of the carb. What about on the air cleaner side?

Looks like $4 at bikebandit. I had to select 450L to get the part in the pic to show up in the description. It's absent in the 450T screen. I'd bet it's the same, but don't know.

http://www.bikebandit.com/1982-suzuki-gs450l/o/m21380#sch260836