.png "Powered by vBulletin")
I got Robert Barr's O-ring's for my carbs, and I wondered if there is a guide or step-by-step for installing these. I want to make sure I install them to the correct item, and some of the o-rings don't have labels for where to install. A picture guide would be awesome if it's available. Just want to get it right! And yes, I do have the instructions it came with, but it doesn't cover all the o-rings.
-
-
The last kit I bought were all labelled, A, B, C, D etc...
I do not know of a picture guide, specifically for the sets, but BassCliff's carb tutorial combined with your parts fiche should get you close.
Is there a specific size that is goving you problems?
Link from Robert Barr's website:
Last edited by BigD_83; 07-13-2014, 04:02 PM.'83 GS650G
'83 GS550es (didn't like the colours in the 80's, but they've grown on me) -
If you have the bike in your sig, you should have a CV kit. There are 4 sizes, and three of them are labeled. The tiny ones aren't, and are obviously for the metering screw / mixture screw / <insert your nomenclature here>. If you asked for the Drain screw O-rings, there's a fifth size -- also labeled. Has a big 'D' on the label.
On this site, Basscliff's website and on mine, you'll find a highly detailed step-by-step pictorial on how to rebuild those carbs. Here's one. There's another, also for the CV's, that's a little more up to date. A quick search should bring it up.and God said, "Let there be air compressors!"
__________________________________________________ ______________________
2009 Suzuki DL650 V-Strom, 2004 HondaPotamus sigpic Git'cha O-ring Kits Here!Comment
Comment