1988 gs450 carb model

[Guest]

I am looking to rejet my carb on the 1988 gs450 I am believe the model of the carb is a vm33 smooth bore, but I am not positive - so before I order some jets could anyone verify this?

[JJ]

Why do you feel the need to re-jet? Did you change the exhaust or air filter from the stock configuration?

[chris032188]

Previous owner added pods and straight pipe

[Big Rich]

Stock is BS32.

Post a picture?

[chris032188]

[chris032188]

http://jetsrus.com/a_jet_kit_street/suzuki_450_GS450S.html

I ordered new jets from this page.. hopefully they are the right ones

[JJ]

I hope you didn't order jets for a VM33 smoothbore. That isn't what is in the picture.

[Big Rich]

Are those the cheap Emgo pod filters? If so, they are garbage. It's almost like they were designed to hinder engine performance.

[chris032188]

I hope you didn't order jets for a VM33 smoothbore. That isn't what is in the picture.

na I ordered the ones I linked up that are linked to gs450 on there page

[chris032188]

Are those the cheap Emgo pod filters? If so, they are garbage. It's almost like they were designed to hinder engine performance.

ya PO had them on- I'm going to order better ones soon

[JJ]

ya PO had them on- I'm going to order better ones soon

I would get the new (good) filters before I started jetting. That is, unless you want to go through it twice.

Emgo pod filters are JUNK.

[chris032188]

I have a pair of uni's i can throw on.. i they good?

[JJ]

I have a pair of uni's i can throw on.. i they good?

I have never tried them,. so I can't say. I have only used K&N filters, and have heard good things here about APE pods. Those would be my choices.