Announcement
Collapse
No announcement yet.
83 gs1100gl
Collapse
X
-
83 gs1100gl
I have a 83 gs1100gl with pods and straight/cut pipes. Everything else is stock. The problem is that on the highway after about 20 mins of hauling ass it dies out. All I do to fix it is pull over and let it sit for a few mins to refill the bowls and runs like a champ again. Any recommendations for which jets to buy just to get me in the ballpark would be greatly appreciated. The stock 34bs cv carbs have stock jets in it. Thanks again.Tags: None
-
Pods, cut off pipes, with stock jetting.... Hmm, in your climate,it's likely running so lean ,getting so hot that fuel is boiling in carb bowls producing a no-go! Do some searching on here and you'll find you got to go way up on main jet size1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
-
Jmanor
Originally posted by babysealkilla View PostI have a 83 gs1100gl with pods and straight/cut pipes. Everything else is stock. The problem is that on the highway after about 20 mins of hauling ass it dies out. All I do to fix it is pull over and let it sit for a few mins to refill the bowls and runs like a champ again. Any recommendations for which jets to buy just to get me in the ballpark would be greatly appreciated. The stock 34bs cv carbs have stock jets in it. Thanks again.
Comment
-
If you are going to insist on ruining what little good reputation that motorcyclists have, I will make no suggestions for jetting.
Tell me that you have installed a responsible exhaust system, I might make a suggestion or three.
In the meantime, please continue to run it like that, it will melt itself into a quiet lump soon enough.
Don't get me wrong, I like a little bit of noise, too, but almost NOBODY like straight/cut pipes, especially non-motorcyclists.
By the way, your "fix" is not letting the bowls fill, you are letting it cool down before it melts together.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
With a username like that are you sure your not from Newfoundland?!!1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D
I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35647
- Torrance, CA
Originally posted by babysealkilla View PostI have a 83 gs1100gl with pods and straight/cut pipes. Everything else is stock. The problem is that on the highway after about 20 mins of hauling ass it dies out. All I do to fix it is pull over and let it sit for a few mins to refill the bowls and runs like a champ again. Any recommendations for which jets to buy just to get me in the ballpark would be greatly appreciated. The stock 34bs cv carbs have stock jets in it. Thanks again.Last edited by Nessism; 11-04-2014, 05:06 PM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Fjbj40 View PostWith a username like that are you sure your not from Newfoundland?!!
One symptom of a bad vacuum petcock is random fuel starvation, which can suddenly work again after sitting for a few minutes. Everything else Steve mentioned is also happening. I hate loud/straight pipes as well. "L"s feel no pain......
cgsigpic
83 GS1100g
2006 Triumph Sprint ST 1050
Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring Siren
Comment
-
You must be getting ready to sell the bike on Craigslist.
Half the bike appears to be missing, and it's too dark to see what's left.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment