Announcement

Collapse
No announcement yet.

Vm26 basics

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    Vm26 basics

    Just some basics needed here got a 77 gs750 and need to hnow what each screw does
    side screw = air enrichs/leans entire mixture
    Bottom screw = idle mixture ?? 2 out as standard


    thanks daryl
    Tags: None
    #2
    Bottom is the pilot screw...set at 3/4 to 7/8 out. Side is the MIXTURE screw..regulates air to fuel mixture. this is used for all the tuning. Set it at 2 out as the starting point.

    Set the pilot screw on bottom and then leave it alone.

    Heres the carb rebuild tutorial....http://members.dslextreme.com/users/...rb_rebuild.pdf
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

      #3
      And here is the service manual..........http://www.mtsac.edu/~cliff/storage/...arly8valve.pdf
      MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
      1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

      NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


      I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

      Comment

        #4
        Here is the oring kit...1 kit does 1 full rack of carbs. Go to page 3 of Roberts site and also order the intake manifold orings. Measrue the ID of yours, which I think will be 32MM, and order the appropriate ones.

        http://cycleorings.com/VMkit.html
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment

          #5
          So the pilot screw is feeding more air to the pilot circuit ??

          Thanks for your reply

          Comment

            #6
            Fuel.......Read the service manual and it shows the carb circuits and explains what each one does and why.
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment

              #7
              I'll have a read thanks

              Comment

                #8
                First few pages at the start of the carb section has the diagrams and information
                MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                Comment

                  #9
                  I'm seeing the carb service start at page 70 but can't see any mention of the fuel or air screw


                  thanks Daryl

                  Comment

                    #10
                    Use the settings I stated and youll be fine. What the manual says about the pilot screw is this.....do not adjust. I used to have a chart that showed all the stuff. I will try and find it.
                    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                    Comment

                      #11
                      click the STICKY at the top about OEM carb specs per the manual and see post #43...thats the chart. Use the engine serial number and match it to the chart.
                      MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                      1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                      NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                      I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                      Comment

                        #12
                        So 3/4 to 7/8th out from all the way in then leave it there and do the tuning from the air screw


                        thanks for your help

                        daryl

                        Comment

                          #13
                          Yes...thats correct. GENTLY seat them..when they want to stop dont force them and break the tips off the pilot screws.
                          MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                          1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                          NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                          I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                          Comment

                            #14
                            Ditto

                            Be sure to check the holes when you remove the screws, so you can be sure no one else broke the tip off already
                            1978 GS 1000 (since new)
                            1979 GS 1000 (The Fridge, superbike replica project)
                            1978 GS 1000 (parts)
                            1981 GS 850 (anyone want a project?)
                            1981 GPZ 550 (backroad screamer)
                            1970 450 Mk IIID (THUMP!)
                            2007 DRz 400S
                            1999 ATK 490ES
                            1994 DR 350SES

                            Comment

                              #15
                              I'll give them a look thanks

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X