I've just rebuilt the engine on my '79 GS400. A year ago I rebuilt the carbys with new seals and she ran ok but blew a lot of smoke on one cyl which is why I've done the engine rebuild. When I pulled the carbys off I just put a rag in them and sat them to one side. I put the bike all back together, was able to rode it 20 meters on the first try and it then stalled. Now I can't get the bike to run off the choke. I can get it started on choke but it soon after starts to labour and then stall. I screwed in the air mixture screws and let them out 1 1/4 turns as the manual says. Any thoughts?
-
-
Is the airbox on?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Did you set the points and timing manually? does the bike start easily enough but just won't run when the choke is off?Comment
-
*ahem* not enough fuel in the tank *ahem* ahhh what a noob.Comment
-
Most of us have done something equally as noobish.
How does it run now that it has fuel?2@ \'78 GS1000Comment
Comment