The Z1 Carb boots have a "spigot" that you can connect tubing to directly (they fit the GS1000 with minor mods to slot the fixing holes). If you haven't replaced the carb boot O rings then you probably should - they are cheap. If you have carb boot leaks I have two sets here that are not pretty but are serviceable...
Announcement
Collapse
No announcement yet.
Tank clean up MEK
Collapse
X
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13982
- London, UK to Redondo Beach, California
You need some adapters with the stock suzuki carb boots, if you have a drill press you could drill through some bolts or maybe you can turn a thread onto some small plastic pipe. You need a very small diameter to act as a damper anyway so as long as you can get consistent size holes through & screw it into the port on the boot (with an O ring to get a seal) it should work.
The Z1 Carb boots have a "spigot" that you can connect tubing to directly (they fit the GS1000 with minor mods to slot the fixing holes). If you haven't replaced the carb boot O rings then you probably should - they are cheap. If you have carb boot leaks I have two sets here that are not pretty but are serviceable...1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
-
BADJACKSON
Thanks Salty, but I bought all new O rings from cycleorings along with top & bowl gaskets & screws too.
Comment
-
BADJACKSON
Comment