Announcement

Collapse
No announcement yet.

intake boot torque

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    intake boot torque

    Hi all,


    1979 GS850 VM Carbs..

    Should have asked this before switching out the intake boot rings from Mr. Barr and putting it all back together, but....

    How tight should the bolts be for the intake boots? I've been rooting around the site and BikeCliff's and the manual... can't seem to find it. I think I recall a post warning of over tightening and flattening the o-rings.

    Is it the 6 to 8 lbs that the manual says to tighten 6mm bolts?

    #2
    same as all 6mm bolts
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment

    Working...
    X