.png "Powered by vBulletin")
I have searched basskliffs website for info about this carb, and others with a similar setup, and still cannot find out how to properly remove this cover! It is a Mikuni dual barrel carb for an 83 550.
Carb.jpg
Carb.jpg
-
-
Pretty sure it is not meant to be removed. You'd have to drill and pull it...'83 GS650G
'83 GS550es (didn't like the colours in the 80's, but they've grown on me) -
Never mind it just pulls right off.
Comment
-
Did it deform at all when you removed it?Originally posted by ColinClayton View PostNever mind it just pulls right off.'83 GS650G
'83 GS550es (didn't like the colours in the 80's, but they've grown on me)Comment
-
-
Those are basically dust shields. Not critical that they seal completely. They can be pretty deformed as long as the shaft turns freely.http://img633.imageshack.us/img633/811/douMvs.jpg
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.;)
JTGS850GL aka Julius
GS Resource Greetings
Comment
-
That'll clean up with some filingComment
Comment