Any experience with these VM gaskets?

[Guest]

Seen these http://www.ebay.ca/itm/161751012064?...%3AMEBIDX%3AIT And it seems like a good deal to me.If the description is believed they might even be better than OEM So what does the GSR hivemind think?

[chuck hahn]

Bowl gskets dont take much pressure to seal. Youll probably be fine.

[hampshirehog]

As Chuck says, they'll be fine. Heck, you could make those gaskets out of a cornflake box and they'd be ok.

[tkent02]

As Chuck says, they'll be fine. Heck, you could make those gaskets out of a cornflake box and they'd be ok.

Done quite a few this way when I needed one right now, they all worked just fine. There's no pressure, gasoline swells the paper a little bit, it's fine.

[SVSooke]

Thanks for the feedback.Thought they'd be better than the homemade I have in one of the 1000's now.The rest can use replacing to so for $23CAD +free shipping I'll be getting them

[SVSooke]

Well like everything with the 1000 it took longer than expected but they where finally in the mail today.You can keep your Cornflakes box gaskets and even new OEM ones as these are that nice.If you need new VM gaskets I HIGHLY recommend these

[Toucan]

Thanks for sharing, I have some on the way now also

[Toucan]

Turned up today, look good

[Toucan]

Going to have to change my mind on these ones, I had it on the workbench overnight and look at how it has shrunk compared to the new fiber one behind it. No good if you are taking carbs apart and intending to reuse these gaskets. I'll stick with fiber for now.

[SVSooke]

Hmmmmm....wouldn't have expected that

[phydeauxmutt]

Also curious about this line:

LISTING IS FOR 3 HIGH QUALITY GASKETS , BUY 1 SET OR UP TO 5 SETS AND FREE SHIPPING !!.

If the listing is for THREE gaskets, do you have to order two sets to get the four that you need to do a set of GS carbs?

[tkent02]

Should have used the cornflake box.