Announcement

Collapse
No announcement yet.

BS32 / 34 carbs --> rubber cap above the needle fuel jet --> compulsory?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by boris.h View Post
    ok, so... if the caps do not fit tightly, that is not an issue, finally??
    I think I'll make my owns in aluminium...
    The BS carbs on my 82 GPz have aluminum plugs with an O ring so rubber plugs are not the only way the passage is blocked off.

    Comment


      #17
      ok, found!
      Using my caliper, checked that the rubber caps are maintained with the body (I do not have the word in english), the big aluminium chamber where there is the gasoline.
      So I also confirm that these caps do not have to be plugged tightly into the body...

      Comment


        #18
        Use the original equipment manufacturer (OEM) plugs; they work. They may not fit tightly but they need to seal the hole.

        Comment

        Working...
        X