Announcement

Collapse
No announcement yet.

Carb Settings - Help needed - BS34SS - 82' GS1100GK

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Settings - Help needed - BS34SS - 82' GS1100GK

    Hi guys

    again looking for your help...

    so i have pods, pipes4-2, rejettings carbs.

    but my bike not idle good - cold wants to shut down, and hot getting better - when left the accelerator, it tooks like 1 sec to get back to idle

    i played a little with air/fuel mixture screw and: if i lock these the bike starts faster but taking more time to idle - and if unlock it it is going too rich and hace no power
    for now i put these 3.5 turns out

    i checked for air leaks and seems to be fine, i couldn´t fine leaks

    carbs are clean - rubbers are new like o-rings

    i read a lot of post and tutos but could'nt understand what is happening...

    i hope you will help me guys

    happy new yeat GS Guys!!!

    #2
    Did you replace the o-ring under each carb boot? Part#28 in attached diagram? If yes, did you get viton o-rings? Plumbing style buna material won't survive long.

    1981 gs650L

    "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

    Comment

    Working...
    X