Announcement

Collapse
No announcement yet.

82 GS750 idle problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    82 GS750 idle problems

    Hey everybody!

    Brand new to this website, but have found plenty of good answers already!

    I recently purchased my first bike! A beautiful '82 GS750. I cleaned the carbs, replaced the jets with larger sizes, added pods on to the bike and am transforming it into a café racer. It used to bog down because it was running real lean, but have since fixed that with the jets. The only problem happening now is that the bike idles really high (around 3,000 - 4,000 RPMs) while I'm riding and holding the clutch down. After coming to a stop, it will continue to idle high in neutral. I've played with the idle adjustment screw, and also with loosening the throttle cable, but can't seem to drop those RPMs. Weird thing is when I first start it up, it runs around 2,000 RPMs. Just in the process of riding does it skyrocket. Does anyone have any ideas of how to fix it, or figure out what may be wrong?

    Appreciate any help I can get!
    Thank ya!
    -Cow

    #2
    Hey Cow, you have a vacuum leak.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Funny thing is, if it's like mine ('82 1100E), it's supposed to idle extremely high on cold start with full choke.

      Yeah, air is leaking somewhere!

      Welcome to the site.
      1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

      2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

      Comment


        #4
        Thank you guys... I'm a definite newbie at this stuff!

        Comment

        Working...
        X