Replacing Carb Nipples / Fuel Tee's

[Guest]

Hello world -

I'm in the process of rebuilding my carbs and nearly done! I wanted to replace the crumbling plastic nipples and fuel tees that link between the carbs. I saw aluminum versions online and wanted to double check before I pulled the trigger.

Will these fit my 1981 GS850 carbs?

• fuel pipe joint: https://www.z1enterprises.com/product/ZSM05-1010 (
• fuel rail: https://www.z1enterprises.com/product/ZSM05-1009
• fuel tee: http://www.ebay.com/itm/Suzuki-Carb-...-/272112130491

OEM part #'s are below, but the links don't exactly match them...
source: http://www.partzilla.com/parts/searc...TOR/parts.html

• 13685-45110
• 13685-47080
• 13685-47070

Thank you!

[tkent02]

If they spacing between carbs is right they should work fine.

[2BRacing]

The first 2 links refer to pre-1980 models, so they will be for VM type carbs. Not sure if they will also fit CV type carbs.

The third link is for post-1980 models, so will be correct for CV type carbs.

[cloud624]

The first 2 links refer to pre-1980 models, so they will be for VM type carbs. Not sure if they will also fit CV type carbs.

The third link is for post-1980 models, so will be correct for CV type carbs.

Yep! Mostly concerned about the first two links... Is there a way I can verify if they will fit CV carbs?

[JTGS850GL]

If you're interested, then PM me. I have the parts you need in very usable condition.

[geol]

The fuel tee and rails from a VM26 won't work on a BS32 assembly.

[cloud624]

If you're interested, then PM me. I have the parts you need in very usable condition.

Amazing! Just PMd you.
This is the second time you saved me 🙏🏼