Bike runs great on side stand, sputters and dies when it leans right

[dantodd]

Either solder the connections or go get flat tab connectors and solder those. If you really really want the connector you can buy pins or whole new connectors. Personally, I would replace the connector with flat tabs

[cp___32]

Solved!
I had a chance to play around with the bike again tonight. Decided to loosen the pickup for the left coil (the one with the white wire) and move it a little closer to the rotor on the Dyna-S. Got much better spark (now equal with the other side) and the bike now fires on all 4 cylinders!

The left pickup is a bit closer than the right, but since it works I'm not going to worry about it.

Now onto the next issue, but that's for another posting!

Thanks everyone for all your help!

[dantodd]

Glad you figured it out.