Announcement

Collapse
No announcement yet.

GS1000 Petcock 1978 rebuild help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Sorry no photo, hard to take a pic of what can barely be seen down a 1/8inch hole. but I think the bit in question is supposed to be pressed into the hole for the vacuum port pointy side down.
    In your first pic it looks like the thing is upside down and in the wrong hole.
    Yes your diaphragm assembly sounds correct
    Last edited by Guest; 06-23-2016, 08:25 AM.

    Comment

    Working...
    X