Announcement
Collapse
No announcement yet.
Carb Leaks
Collapse
X
-
Carb Leaks
Carb leaks into filter box only when running. Bike seems to run ok. How should proceed to solve problem.Tags: None
-
Originally posted by collins58 View PostCarb leaks into filter box only when running. Bike seems to run ok. How should proceed to solve problem.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
-
collins58
-
Sticking float, wrong float level, worn needle valve or o ring hardened / shrunk/ missing on the float valve seat. Check which carb is the culprit by pulling the air filter out and seeing which airbox to carb hose is wet.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father
Comment
-
collins58
-
How were the carbs cleaned? Were they properly and fully disassembled and dipped for 24 hours each or did you just spray carb cleaner at the holes? Did you replace the orings and measure the floats when you put them back together?Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
Comment
-
collins58
When I got the bike did not run. Took to a shop he said cleaned carbs got running. But he took forever to get hike back almost two months. Ran ok for awhile. But had idle issues. Started to race above 3000rpm when adjusted idle screw back would not idle load up and stop. Through gsresources used a procedure to adjust fuel air mixture stews. Got to idle ok run down road. Not to long later gas leak as dis robed started.
Comment
-
collins58
Ok took cover off filter box. Put petcock in prime position. Could see was number one carb leaking. Tryed simple fix first. Took screw out bottom of carb bowl. Let gas run while tapping on carb. Put back together. As of now no more leak. Hopefully got lucky. Thanks for all the advise.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35602
- Torrance, CA
Sounds like rust/debris in the tank has fouled the float needle.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Sounds like it's time to clean the carbs (correctly), too.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
collins58
Comment