.png "Powered by vBulletin")
I don't understand how you will be getting "extra vacuum" by using a shorter hose. 
.
.
-
sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
I spliced my original hose into the new hose i bought because i couldnt get it onto the carb inlet, hose diameter was too big. Im thinking it could have a little leak and is pulling in extra at the old and new hose connection? Possible?
New oem hose and clamps on orderComment
-
If you have a leak between the two hoses then surely you have less vacuume (a leak) not exrtra.The big guy up there rides a Suzuki (this I know)
1981 gs850gx
1999 RF900
past bikes. RF900
TL1000s
Hayabusa
gsx 750f x2
197cc Francis Barnett
various British nailsComment
Comment