.png "Powered by vBulletin")
I was wondering if anyone could tell me what screws need to be adjusted on these bikes when doing carb sync?
A video or some pictures would be great and thanks for any advice.
A video or some pictures would be great and thanks for any advice.
-
-
When in doubt look at the factory service manual.
Figure 8-20
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Thanks I do have the manual but wasn't sure if I was reading it correctly.
So I can run the bike with top covers of carbs removed while I adjust with sync tool?
This is my first time and just wanted to have as much info before starting the sync.Comment
-
That's how it works
The sync tool only shows you where the slides are, screwdriver and wrench to adjust1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
Comment