.png "Powered by vBulletin")
On my Mikuni VM22SS carbs there is a vacuum home from carb 2 to 4. I cant seem to find this on any diagram or pictures, should I just remove it? See picture for more detail. IMG_20170203_130736.jpg
-
-
Take the hose of one nipple and get another hose the same length and fit to the other nipple; they're vent lines and the ends should just dangle over the back of the airbox in the fresh air.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father -
The vacuum hose that crosses over from one side to the other is not supposed to be connecting the vacuum ports together. Each of those vacuum ports are supposed to be vented to air and are usually connected to separate hoses that end up being draped over the top of the air box.http://img633.imageshack.us/img633/811/douMvs.jpg
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.;)
JTGS850GL aka Julius
GS Resource Greetings
Comment
Comment