Announcement

Collapse
No announcement yet.

cleaning all the brass tidbits while carb bodies are dipping ? and gaskets?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Have you tried a brass cleaning solution before? The one I've used is just basic household ingredients and only takes a few minutes. Given my experience with Hoppe's I'd be surprised if you wouldn't like this better.

    NRA Brass Cleaning Solution 1957

    1 Pint water
    1 cup white vinegar
    1 tablespoon salt
    1 teaspoon dish detergent (Dawn)

    Deprime cases first, wash in this solution for about 10 min. Rinse 10 minutes. Dry well in sun, oven etc.
    Something like that, there are several variations. Give it a try sometime.

    Comment

    Working...
    X