Announcement

Collapse
No announcement yet.

Fuel lines - for gs550e

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fuel lines - for gs550e

    This is going to sound a daft question but I simply cannot find good, flexible
    fuel lines for my bikes. Not just the gs550e.

    Could anyone part with information as to where they get them from ?

    GS550e fuel tap size:

    fuel connector - 8mm - Thus fuel line id - 7mm
    Vacuum connector - 7mm - Thus fuel line id - 6mm

    I intend to find and install new fuel lines and as we all know to do this the airbox has
    to be pulled back and putting that back on is a practice that can cause mental meltdown.
    UKJULES
    ---------------------------------
    Owner of following bikes:
    1980 Suzuki GS550ET
    1977 Yamaha RD 250D
    1982 Kawasaki GPZ 750 R1
    1980 Suzuki GSX 250E

    #2
    Suzuki Part# 09352-60103-600
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Thanks BUT
      Is there a 3rd party location for fuel lines where i can buy for all my bikes ? Stuff that works ?

      Looking at that part number and knowing how they work that looks like:
      m6 id * m10 od and 600mm long ?

      I suppose that is the one and i should think no more on the matter. I think you are right - buy i will - thanks.
      UKJULES
      ---------------------------------
      Owner of following bikes:
      1980 Suzuki GS550ET
      1977 Yamaha RD 250D
      1982 Kawasaki GPZ 750 R1
      1980 Suzuki GSX 250E

      Comment


        #4
        When you get that fuel line Suzuki provides about 5 feet in the bag. It's actually a pretty good value for the money.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Agreed. no question.

          thanks
          UKJULES
          ---------------------------------
          Owner of following bikes:
          1980 Suzuki GS550ET
          1977 Yamaha RD 250D
          1982 Kawasaki GPZ 750 R1
          1980 Suzuki GSX 250E

          Comment


            #6
            Jules, go to Halford they sell various sizes of fuel pipe. You may have to ask at the parts counter, they don't always have them on the shop racks. They are in 1 metre lengths. When are you starting the journey ?.
            My bikes 79 GS1000 1085 checked and approved by stator the GSR mascot and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000N

            Comment


              #7
              The journey will start this year. It might start
              within 2 weeks as I find myself unemployed again.

              Just getting spares etc ready but I am basically
              ready now !
              The route to Croatia and Italy not planned but I'll
              Follow the weather .

              I'll provide a post on the epic journey !
              UKJULES
              ---------------------------------
              Owner of following bikes:
              1980 Suzuki GS550ET
              1977 Yamaha RD 250D
              1982 Kawasaki GPZ 750 R1
              1980 Suzuki GSX 250E

              Comment

              Working...
              X