Announcement

Collapse
No announcement yet.

Fuel lines - for gs550e

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fuel lines - for gs550e

    This is going to sound a daft question but I simply cannot find good, flexible
    fuel lines for my bikes. Not just the gs550e.

    Could anyone part with information as to where they get them from ?

    GS550e fuel tap size:

    fuel connector - 8mm - Thus fuel line id - 7mm
    Vacuum connector - 7mm - Thus fuel line id - 6mm

    I intend to find and install new fuel lines and as we all know to do this the airbox has
    to be pulled back and putting that back on is a practice that can cause mental meltdown.
    UKJULES
    ---------------------------------
    Owner of following bikes:
    1980 Suzuki GS550ET
    1977 Yamaha RD 250D
    1982 Kawasaki GPZ 750 R1
    1980 Suzuki GSX 250E

    #2
    Suzuki Part# 09352-60103-600
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Thanks BUT
      Is there a 3rd party location for fuel lines where i can buy for all my bikes ? Stuff that works ?

      Looking at that part number and knowing how they work that looks like:
      m6 id * m10 od and 600mm long ?

      I suppose that is the one and i should think no more on the matter. I think you are right - buy i will - thanks.
      UKJULES
      ---------------------------------
      Owner of following bikes:
      1980 Suzuki GS550ET
      1977 Yamaha RD 250D
      1982 Kawasaki GPZ 750 R1
      1980 Suzuki GSX 250E

      Comment


        #4
        When you get that fuel line Suzuki provides about 5 feet in the bag. It's actually a pretty good value for the money.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Agreed. no question.

          thanks
          UKJULES
          ---------------------------------
          Owner of following bikes:
          1980 Suzuki GS550ET
          1977 Yamaha RD 250D
          1982 Kawasaki GPZ 750 R1
          1980 Suzuki GSX 250E

          Comment


            #6
            Jules, go to Halford they sell various sizes of fuel pipe. You may have to ask at the parts counter, they don't always have them on the shop racks. They are in 1 metre lengths. When are you starting the journey ?.
            My bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000N

            Comment


              #7
              The journey will start this year. It might start
              within 2 weeks as I find myself unemployed again.

              Just getting spares etc ready but I am basically
              ready now !
              The route to Croatia and Italy not planned but I'll
              Follow the weather .

              I'll provide a post on the epic journey !
              UKJULES
              ---------------------------------
              Owner of following bikes:
              1980 Suzuki GS550ET
              1977 Yamaha RD 250D
              1982 Kawasaki GPZ 750 R1
              1980 Suzuki GSX 250E

              Comment

              Working...
              X