I currently rebuilding my carbs for my 1980 gs250. I put new orings on the float needle screen and noticed that one is deeper than the othe. does it matter which side the deeper? My new float needles are the same size. do I just adjust that when I put the floats on.? I believe my carbs are bs30'inhave two instead of four. A quick response would be super helpful..I read the rebuild tutorial but it mentions nothing about this. I also looked through and search for this at least a dozen times
Announcement
Collapse
No announcement yet.
Bs30 carb float size
Collapse
X
-
Bs30 carb float size
First time poster long time scroller
I currently rebuilding my carbs for my 1980 gs250. I put new orings on the float needle screen and noticed that one is deeper than the othe. does it matter which side the deeper? My new float needles are the same size. do I just adjust that when I put the floats on.? I believe my carbs are bs30'inhave two instead of four. A quick response would be super helpful..I read the rebuild tutorial but it mentions nothing about this. I also looked through and search for this at least a dozen times -
A picture (or more) would be a BIG help.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment