.png "Powered by vBulletin")
I need a new petcock for 1980 gs850l , I measured the bolt spacing it is 44mm is this measurement correct ? I see some comments say the measurement should be 50mm.
-
-
The stock petcock (PN 44300-47270) is still available from Suzuki.
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.
JTGS850GL aka Julius
GS Resource Greetings
-
Can it be replaced with a lever on/off petcock ?Comment
-
Not enough room under there. That's why Suzuki used that type of petcock. They work just fine though.Originally posted by ceh3523 View Post
1980 GS1000GT (Daily rider with a 1983 1100G engine)
1998 Honda ST1100 (Daily long distance rider)
1982 GS850GLZ (Daily rider when the weather is crap)
Darn, with so many daily riders it's hard to decide which one to jump on next.
JTGS850GL aka Julius
GS Resource Greetings
Comment
-
I just had my petcock bolt spacing measured again and came up with 44mm again everything I see on the internet says it should be 50mm is this right ?Comment
-
How about a pic pf your petcock- maybe someone switched tanks or you don't actually have a 1980 model. The typical 1980 petcock is 50mm centerline1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
Sorry for the bad info I borrowed my neighbors calipers and it does measure 50mm , threw my calipers in the garbage. I see alot of guys are using the plastic shut off switches do these last or are there better ones out there ?Comment
-
New OEM factory petcock and forget about it for the next 20 years.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
Comment