.png "Powered by vBulletin")
hi folks, i'm putting together a historic GS1000R race bike which has 42mm outside diameter mikuni carbs. does anyone know what sort of carb rubbers might be suitable?
-
-
Iis this the measurement at the engine side? Whats the ID and the OD there??? VM or CV carbs? Pics will help a lot also.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
yip engine, 42mm outside diameter of carbsComment
-
Have a look at Sudco catalog, you are looking for Mikuni manifolds.1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D
I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.Comment
-
you on FB or anything. love a few pics to look at if its a 1000r thanksComment
-
Trojans, very flexible. LMAO, sorry had too.sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Comment
-
-
an example of the drilling Pop's Yoshimuras wife did on the motorComment
Comment