Best place for Mikuni parts

[Guest]

Rebuilding the BS32s on the GS850 and buggered up 3 of the needle jets. They took a lot of banging to get them out they were essentially glued into the carb body with varnish, I need a lot of other part too mostly o-rings. Is there some sort of factory direct mikuni parts warehouse? I looked them up on RMATV and they are about 20 bucks a pop, a lot of O-rings aren't listed for some reason.

Thanks for any help,
Josh

[Steve]

The o-rings are easy. Go to cycleorings.com. It is run by one of our forum members FOR our forum members.

For the jets, try Jets R Us. I didnot see needle jets listed, but give them a call. There is a chance I might have what you need in my stash, I can check this evening when I get home.

.

[sharpy]

If your on FB try Ben, im in the group but he is based in the UK..... https://www.facebook.com/groups/128207204603241/

[Downs]

The shipping from the UK would probably kill me. Thanks for the link to the oring site.

@Steve ifyou've got some good ones laying around I'll take them just let me know. The ones I have can no longer accept the main jets because when I was driving them out I boogered up the threads from all the hitting. Even using a brass punch. Most of my Jets are in good shape after going though the carb dip. Looks like most of my replacement parts are going to be o-rings on the fuel tubes and enricher circuit plungers.

[Downs]

Ordered the cycleorings kit along with Allan head hardware and orings for the intake boots.

Can anyone verify if part 60 on this ficshe is the correct one for the rubber caps on the enricher plungers? The Fische isnt real clear on that.

https://www.rockymountainatvmc.com/oem-schematic/6

Screenshot_20180426-160812_Chrome.jpg

[Big T]

https://www.z1enterprises.com/fuel-mixture-screw-bs-series-gs750-gs850-gs1000.html

Z1 is your friend

[Downs]

That's just the fuel mix screw. Mine is good. Z1 is a great site but their kits don't have what I need other than the bowl gasket and I don't see needle jets in there. Most of my parts are good just orings are rotted/rock hard after 35 years.

[Frank Z.]

If Steve's stash doesn't produce, appears the X-5s are still available from Suzuki @ around $18 a pop. There are also a couple on ebay: Link

[Downs]

Yup was seeing them on the various OEM sites for 15-20 ;bucks. Not awful other than I maimed three of them lol. Guess i need to look closer at the 4th one. The varnish really had them glued in.

[Jojo591]

I'm really new to this. Mine is an 82 GS850G. Where can I find carb rebuild kits and fork kits? Everywhere I see them they all look different and I dont want to spend a bunch of money and not find the right parts!

[limeex2]

Sometimes shipping from the UK is not bad. Ordered OEM Triumph brake parts and with shipping were still cheaper than stateside.

[Downs]

I'm really new to this. Mine is an 82 GS850G. Where can I find carb rebuild kits and fork kits? Everywhere I see them they all look different and I dont want to spend a bunch of money and not find the right parts!

OEM parts sites used to be my go to but then I switched to my local shop who can get them just as fast as the sites send them to me for about 3 dollars more than online but with no shipping. Is yous the L (cruiser) or standard model? All you probably really need for fork parts are new seals and dust wipers unless you are going to respring then you can get springs pretty much anywhere that sales bike parts.

Z1 enterprises carries carb kits you can search your bike specifically on there. Your bike should have Mikuni BS32 carbs if you want to look that way.

[sharpy]

Try here. used them on brothers TRX and had everything i needed... http://www.keyster.ca