Announcement

Collapse
No announcement yet.

4 into 1 exhaust

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    4 into 1 exhaust

    Been thinking about ditching the exhaust (lack of) on my bike and going with a 4 into 1. Because of the alterations to the ride height I have made, I'd like to get one that tucks up fairly tight. If those who are running 4 into 1's could post a dimension from the bottom of the frame to the lowest point on the exhaust and let me know what exhaust/bike you have.


    Much appreciated in advance!!!

    -mark
    -Mark
    Boston, MA
    Suck Squeeze Bang Blow..
    sigpic
    1980 GS850G with 79 carbs.....

    #2
    Have a look at a Marving exhaust out of the U.K.
    They have a "flat" instead of a "stacked" collector section that should help with ground clearance.
    I know they make a system for the GS1000 not sure if they do an 850 version.
    2@ \'78 GS1000

    Comment

    Working...
    X