Announcement

Collapse
No announcement yet.

VM26; correct needle to arm assembly

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Has anyone heard of the spring in the arm connected to the slide wearing out?

    my slides barely come up enough to meet the standard for the bottom of slide to carb body clearance.

    my idle screw is turned in all the way and it does idle correctly but I have what I think is a valve guide seal problem.

    but yeah, I wonder if those flimsy springs are working well enough. The 78’ and later design looks like a better design.

    Comment

    Working...
    X