.png "Powered by vBulletin")
Is there a preferred method to get it together with that god-awful lack of clearance everywhere? I know about pliable, boots, warming, etc. It was a bear to get them off. Can the engine be tilted slightly forward or anything? 1/4 inch would certainly help......
-
-
Apparently you're using the stock airbox. My sympathies.1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after. -
I've heard you can shove the rubbers back into the airbox a ways and then tender them back out after the carbs are installed? Anybody try that?Comment
-
Are you talking about an E,G or L?1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
If he is having THAT much difficulty, it won't be a G or an L (really a GL).
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
My 82 was the same, it was an EZComment
-
And it was not EZ removing my airbox - took me a couple of days with the Dremel. Not kidding.Originally posted by wymple View Post1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.Comment
-
I just fitted carbs to a 82 GSX750ET/GSX750EX, I found it pretty easy by fitting the carbs to the airbox rubbers, I left the airbox loose and pulled the carbs backwards slightly with the airbox, then just slipped in each inner intake rubber and then the outer rubbers. It was all done inside an hour, spent a day cursing trying other methods. The intake boots are angled fitting them last allows you to put the thin part in and turns the boots around.Last edited by Rickta; 04-30-2019, 08:20 AM.Comment
Comment