years ago, when I was on gsresources, I feel like BassCliff, or someone else had a hose diagram. I'm not sure which inlet, or t-junction to hook up the fuel line coming from the petcock to. After priming, I had all dry bowls, so I'm nervous about where the gas went. Any help, with a diagram, would be appreciated. Sorry for the newb question, but there it is...
Announcement
Collapse
No announcement yet.
Real Basic Fuel Line Question
Collapse
X
-
Real Basic Fuel Line Question
...And one that seems impossible (for me) to find an answer to. I am looking for a diagram of how to route the fuel lines on my Mikuni carbs ('81 gs750). I removed the tank to start the seasonal cleanout process, realized I (probably) didn't re-route the lines correctly, and now cannot find the correct layout.
years ago, when I was on gsresources, I feel like BassCliff, or someone else had a hose diagram. I'm not sure which inlet, or t-junction to hook up the fuel line coming from the petcock to. After priming, I had all dry bowls, so I'm nervous about where the gas went. Any help, with a diagram, would be appreciated. Sorry for the newb question, but there it is...Tags: None
-
BigVoxjammer
sorry...any diagram that also shows the vacuum lines would also be nice. I hooked the line from the petcock to the inlet on carb 2. Should I have used the metal t-junction at the very bottom of the carbs assembly, or the plastic t that links the hoses from the outer carbs? I'm assuming/remembering that the plastic t is a vacuum port. Anyhoo, I believe I have illustrated the nature of my problem with these two posts. Thanks again, gang!
-
BigVoxjammer
Comment