which exhaust gasket

[markla]

HI all i have managed to find a set of down pipes for my gs750 which when i get the mufflers will need gaskets,

looking on line i see there are a few different types i can buy which would be the better option copper,fibre,alloy.

your thoughts on which ones i should get please.

Kind regards,Mark.

[fastbysuzuki]

My personal preference are these https://rover.ebay.com/rover/0/0/0?m...2F273927752203

[bwringer]

My personal preference are these https://rover.ebay.com/rover/0/0/0?m...2F273927752203

Yep, that type with the cardboard-looking stuff seem to work quite reliably, they're cheap, and you can often re-use them once or twice if you're a little lucky. I squish them to make them slightly oval so they'll "stick" in the exhaust.

Don't just order one set; buy a few sets and keep 'em around. They're cheap, and the aftermarket versions seem to work the same as OEM.

I've tried copper, and they didn't seem to seal as well and once they crushed could not be re-used. More expensive, too, I think.

[markla]

thanks for the reply's got another question for you all am i likely to find a pair of genuine silencers
anywhere or is it going to be retro fit any info much appreciated.