Engine Stops While on Idling Rev

[schwalbewurger]

Carb cleaning
IMG_3269.jpg

[Big T]

A good start
Did you get an O ring kit?

[schwalbewurger]

A good start
Did you get an O ring kit?

Yes, but not from the cycleorings site. So how many turns would you recommend us to tune for the air screw and the fuel screw for pod filters with stock exhaust at ~2300 feet? Should we start with 7/8 out for fuel screw and 1 1/2 out for air screw?

Thanks!

[salty_monk]

Ape don't do a smaller size Pod so you're out of luck there... There are some other K&N copies around, I think someone here posted a cafe racer type supply place in the Bay area that had some.

The easiest way to jet a bike for PODS is to use a Dynojet kit. You may find it quite difficult without that.

A good resource for our bikes is https://www.z1enterprises.com/

[Big T]

Yes, but not from the cycleorings site. So how many turns would you recommend us to tune for the air screw and the fuel screw for pod filters with stock exhaust at ~2300 feet? Should we start with 7/8 out for fuel screw and 1 1/2 out for air screw?

Thanks!

That would be a good setting to start with for the pilots
Remember, they only control idle and off idle mixture