Dipping VM carb bodies?

[Guss77]

Great advice guys. I appreciate it 😁. Yup. I did notice that 2 of my float bowls are super shinny and the other 2 are kinda dull. I’ll get out the sand paper and polish and see if I can buff them. Hmmm. Thank you.

[2BRacing]

....... I did notice that 2 of my float bowls are super shinny and the other 2 are kinda dull. ..

They came like that from the factory. The shiny ones were on #1 and #4, where they are visible from the sides. The "dull" ones were inside on #2 and #3 where they are not really visible.

Factory saved 50% on polishing time / materials! Only a bean-counter would have thought that one out!

[Guss77]

Oh wow. That makes sense as there’s also two super shiny tops!! Thank you!

[crag antler]

I’ve had luck with my medical grade ultrasonic cleaner doing carbs with a 50/50 mix of Pinesol and water.
Get the “real” Pinesol and not an off brand and you should be good

[Guss77]

Cool. I’ll try it! Thanks