carb dip - in australia

[angrypants]

Hi gents,

living in Australia its very hard to get the potions you guys in the USA get - my yamalube is tired, its the water soluble one and i've dipped carbs in it 5times over 3 years.....so I'm looking for something, as i cant find yamalube in stock anywhere at present.

I hope you guys might be able to tell me if this is any good... its cheap at $49 aussie dollars for 5 litres ... not that i am after cheap, but its the only thing i can find with ingredients listed in this sort of size, and a dip not a spray

- so not many options, however i have found this stuff

http://www.sydneysolvents.com.au/throttle-body-cleaner-5-litre

its ingredients are listed as 30-80% acetone, 30-80% toluene, and 20-30% methanol

there is this one too but its only 1000ml and $68 and doesn't say what's in it , but does sound strong in that they say you have to remove seals and membranes http://www.motorex.com/en-us/moto-li...buretor-clean/

your thoughts or other ideas would be greatly appreciated ?

thanks
Grant

[LAB3]

Here's what "The good stuff" is made of in case you're interested.

https://www.berrymanproducts.com/assets/CD-A-Int-0996-R01.pdf

http://www1.mscdirect.com/MSDS/MSDS00019/40237794-20151206.PDF

[xkaes]

Check out the "KEROSENE" discussion on this sub-board!!!!

[Nessism]

Hi gents,

living in Australia its very hard to get the potions you guys in the USA get - my yamalube is tired, its the water soluble one and i've dipped carbs in it 5times over 3 years.....so I'm looking for something, as i cant find yamalube in stock anywhere at present.

I hope you guys might be able to tell me if this is any good... its cheap at $49 aussie dollars for 5 litres ... not that i am after cheap, but its the only thing i can find with ingredients listed in this sort of size, and a dip not a spray

- so not many options, however i have found this stuff

http://www.sydneysolvents.com.au/throttle-body-cleaner-5-litre

its ingredients are listed as 30-80% acetone, 30-80% toluene, and 20-30% methanol

there is this one too but its only 1000ml and $68 and doesn't say what's in it , but does sound strong in that they say you have to remove seals and membranes http://www.motorex.com/en-us/moto-li...buretor-clean/

your thoughts or other ideas would be greatly appreciated ?

thanks
Grant

Both of those products look good. Use in a well ventilated area given the strong solvents in the first one.

[angrypants]

thanks guys