Announcement
Collapse
No announcement yet.
Bike sputters at different RPMs in different gears
Collapse
X
-
Bike sputters at different RPMs in different gears
My bike will sputter and not die but wont go past different RPMs in different gears. So in in 3rd gear i can get it to 6k then it wont go past that and will just sputter no how much gas i give it. In 5th it wont go past 5k rpm and sputters, and in 6th wont go past 4.5k rpm. And It is exactly each of these RPM numbers, right on the number/and or line. Sometimes i can hear that the left cylinder stops firing because i dont hear anything from the left exhaust. Notes: Otherwise carb runs good I think, only 28k miles. New battery, new spark plugs, checked the cables to the spark plugs and are good. So any ideas?1987 GS450LTags: None
-
What maintenance (last PROPER carb cleaning, valve adjustments, carb sync) has been done? Is this bike new to you or you've had it for awhile? Inquiring minds need to know
AND MOST OF ALL, what bike is this?Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
Comment
-
Forum GuruPast Site Supporter
Super Site Supporter- Jun 2018
- 5591
- Mifflinburg, PA / Land of Tar & Chip
We also don’t know what motorcycle you have, whether you are using stock intake and exhaust vs. individual pod filters. Did this bike ever run good for you? If so, what changed?
Please put your bike year and model in a signature. Go to settings at the top right of any page, then look for signature links on the left side.Rich
1982 GS 750TZ
2015 Triumph Tiger 1200
BikeCliff's / Charging System Sorted / Posting Pics
Destroy-Rebuild 750T/ Destroy-Rebuild part deux
Comment
-
Sorry, it's a 87 gs450l. The bike is new to me, the bike is stock mechanically. As for carb cleaning, syncing and valve clearance I don't know if it's ever been done. Guy I bought it from was going to use the engine to put it on a bicycle till I rescued it. I did put a new petcock in. And from what I can tell the bike runs good and smooth up until those mentioned rpms1987 GS450L
Comment
-
Since you don’t know if that has been done, please read through the Top 10 Newbie Mistakes thread (https://www.thegsresources.com/_foru...ewbie-Mistakes) and take a look through Basscliff’s site (http://members.dslextreme.com/users/bikecliff). Taking time to do all of the basic maintenance will give you the best baseline to start troubleshooting this instead of just throwing darts at itCowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
Comment
-
Originally posted by gabrielgrucela View PostSorry, it's a 87 gs450l. The bike is new to me, the bike is stock mechanically. As for carb cleaning, syncing and valve clearance I don't know if it's ever been done. Guy I bought it from was going to use the engine to put it on a bicycle till I rescued it. I did put a new petcock in. And from what I can tell the bike runs good and smooth up until those mentioned rpms
Now check the plugs cap and wires
Pull plugs to see what color they are.1983 GS 550 LD
2009 BMW K1300s
Comment
-
I am working on a 87 GS450L from a buddy atm.
It would start and run up to approx. 4500RPM and would go no further.
I did all the leg work to exclude possible causes : dipped/cleaned/synced the carbs, shimmed the valves, cleaned up corroded connections in the wiring loom, spark plug caps and coils swap/test, etc.
Did not find a mechanical advancer under the ignition groundplate which i do not yet understand.
In the end i had to suspect the igniter box.
Opening this box is easy, the backplate comes off easily.
The print underneath clearly showed burn/melt signs.
Just for giggles i have hooked up an igniter box from a GS500E and the bike would rev way better.
At least that confirms the suspicion the original igniter box is toast.
WhatsApp Image 2021-06-27 at 19.15.43.jpgLast edited by Rijko; 06-28-2021, 06:23 AM.Rijk
Top 10 Newbie Mistakes thread
CV Carb rebuild tutorial
VM Carb rebuild tutorial
Bikecliff's website
The Stator Papers
"The thing about freedom - it's never free"
Comment
-
Originally posted by Rijko View PostI am working on a 87 GS450L from a buddy atm.
Did not find a mechanical advancer under the ignition groundplate which i do not yet understand.If you're not living on the edge, you're taking up too much space.
Comment
-
Originally posted by Who Dat? View PostStarting in '83, Suzuki did away with the mechanical advance and went full-electronic, it's all contained in the ignitor.
The ignitor being a 'dumb' amplifier of pulses, whereas a CDI would have extra 'intelligence' to also do things like advance.
Apparently there's at least 2 generations of ignitor, learning something new here again, thanks !!Last edited by Rijko; 06-28-2021, 09:27 AM.Rijk
Top 10 Newbie Mistakes thread
CV Carb rebuild tutorial
VM Carb rebuild tutorial
Bikecliff's website
The Stator Papers
"The thing about freedom - it's never free"
Comment
Comment