.png "Powered by vBulletin")
Wasnt someone making these out of metal a few years ago? Anyone know if they are stillavailable?
-
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
How much are you willing to pay chuck? I can make some but they won't be cheap.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
IDEALLY i would like to change them on all 5 of my 1000s. So 25 is my dream number. but your wont be cheap bid makes me think i will need to rob a bank first.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Saw the title of the thread and was thinking of one of those fancy little boutiques you see advertised in the back pages of a local "Alt" newspaper.1980 Yamaha XS1100G (Current bike)
1982 GS450txz (former bike)
LONG list of previous bikes not listed here.
I identify as a man but according to the label on a box of Stauffers Baked Lasagne I'm actually a family of fourComment
-
There were some available made from aluminium a few years back.
Easy to make if you have a lathe.
There's a reason the stock ones are made from Nylon though as it actually wears less than aluminium where the lifter arm contacts and also won't suffer from bimetal corrosion .
The stock Nylon ones are still available new from Niche Cycles etc.Mikuni Viton Choke Plunger Seat Renewal.
VITON Choke plunger seals .KAWASAKI Z1,Z900,Z650,Z1000,Z1R,SUZUKI GS1000,GSXR,RF | eBay
Air Corrector Jets for Mikuni VM 24, 26 and 28mm carbs .
https://www.ebay.co.uk/itm/254380193...84.m1555.l2649
sigpicComment
-
I made some for my 33mm smoothbores from 10mm brass hex bar. No issues with bimetal corrosion, they will last for years because its not like they are constantly moving all the time, and they look and work great
1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
Comment