Announcement

Collapse
No announcement yet.

fuelcock/petcock replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Originally posted by 93Bandit View Post

    Wow, thanks for sharing! Did you just spin the wheel to decide which one to try? Or did you have one laying around?

    I'll be curious to find out if it's any better in quality and functional than the other Chinese petcocks.
    There was another similar thread where one of the posters recommended the XS option. Since I had already spent $20 on the Chinese vacuum version, I opted to take a chance on this non-vacuum version. I have a dremel tool, so if it didn't fit I could easily ream out the mounting holes a little.

    The function seems fine so far, but it's only been a day or so. The quality of the nipple outlet seems fine, but the 90deg elbows seem cheap.

    Here's the unit mounted
    PXL_20220728_222542910.jpg
    Current rides: GS650L, GS550T, GL500, GL1100, Bonnie, Triumph Adventurer, Guzzi California

    Comment


      #77
      Ah, it's non vacuum. Will probably work ok then.
      - 1983 GS850L ~ 30,000 miles and going up - Finally ready for a proper road trip!
      - 1977 GS750B - Sold but not forgotten

      Comment

      Working...
      X