Announcement

Collapse
No announcement yet.

Aftermarket dual pipes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Aftermarket dual pipes

    Has anyone found an aftermarket exhaust that will allow keeping the center stand? I have a 1983 GS750E and it't too quiet for my taste. I do believe there is value in a little more volume to help the car drivers notice me. Plus I like it louder anyhow. Years ago I had a 1983 GS1100E that I drilled the 6? indentions on the end of each pipe and that made things a little louder but I am a grown up now and I don't really want to randomly drill holes in my exhaust , but I love the center stand. I had a Bandit 1200 that someone had installed an aftermarket exhaust on and it sounded fine but it went right where the center stand was.
    Thanks in advance for any help.

    #2
    Soon as I posted this I realized I can probably just keep the stock header and replace the mufflers with something louder.

    Comment


      #3
      Vance and Hines and Marving both allow you to keep the centrestand. I think the Mac ones did too...
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        Originally posted by salty_monk View Post
        Vance and Hines and Marving both allow you to keep the centrestand. I think the Mac ones did too...
        OOH AWESOME! Nice bike.

        Comment


          #5
          Thanks. That's a Marving Race you see in the pic...
          1980 GS1000G - Sold
          1978 GS1000E - Finished!
          1980 GS550E - Fixed & given to a friend
          1983 GS750ES Special - Sold
          2009 KLR 650 - Sold - gone to TX!
          1982 GS1100G - Rebuilt and finished. - Sold
          2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

          www.parasiticsanalytics.com

          TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

          Comment


            #6
            So many of the stock exhausts are difficult to find and expensive if you do find them.
            Just a suggestion to not cut the mufflers off yours.
            Put an ad in the Parts Wanted forum. Some one may have an exhaust they want to part with or trade.
            2@ \'78 GS1000

            Comment


              #7
              Originally posted by steve murdoch View Post
              So many of the stock exhausts are difficult to find and expensive if you do find them.
              Just a suggestion to not cut the mufflers off yours.
              Put an ad in the Parts Wanted forum. Some one may have an exhaust they want to part with or trade.
              Thanks Steve. Yes I don't want to do anything that can't be undone. I respect how old and original my bike is I do ride it so I will improve it when I can but no hacking!
              Last edited by pedalpowerceo; 01-03-2022, 10:58 PM.

              Comment


                #8
                Here she is. I need a seat cover!

                Comment


                  #9
                  Originally posted by pedalpowerceo View Post
                  Can't see it without 'signing in' to Google Photos.
                  1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

                  2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

                  Comment


                    #10
                    Originally posted by Rob S. View Post
                    Can't see it without 'signing in' to Google Photos.
                    Dangit. I messed with trying to load it onto the forum for a while before I tried that. I'll try again when I have a computer nerd handy.

                    Comment


                      #11
                      This is sadly, the best that I can do. Should have gone to college C7BC6714-8974-42BC-9BF9-0DAF3E9B404F.jpg
                      Last edited by pedalpowerceo; 01-04-2022, 12:55 AM.

                      Comment


                        #12

                        Comment

                        Working...
                        X