Turn signal switch dissasembly

[danny01975]

Any of you guys know how to take apart this switch assembly without breaking it? My horn button broke and I need to replace it. I opened it up and it doesn't look complicated. It appears to be held in with a tie strap and a single screw. But It looks like I need to remove the turn signal switch from the front first. When I gently pry on it, it doesn't budge. Again, I really don't want to break it.

Also, if there are tiny parts in there, I don't want them to come flying out!

Oh, this is on a 1982 GS1100 GK.
IMG_3591.jpg

[Nessism]

The big square button needs to be turned sideways in order to remove it. There are a lot of tiny balls and springs, so take it apart over a tub, in case parts fall. I suggest taking it all apart, cleaning, and greasing with dielectric grease.

I have a flickr album with some photos of the guts. I'll post up a link in a little while.

[danny01975]

The big square button needs to be turned sideways in order to remove it. There are a lot of tiny balls and springs, so take it apart over a tub, in case parts fall. I suggest taking it all apart, cleaning, and greasing with dielectric grease.

I have a flickr album with some photos of the guts. I'll post up a link in a little while.

So you mean I need to rotate the square button 90 degrees? Good thing I asked and didn’t try to pry it off!!

[Big Block]

Correct. It's all pretty easy but you don't want to break that knob.

[danny01975]

The big square button needs to be turned sideways in order to remove it. There are a lot of tiny balls and springs, so take it apart over a tub, in case parts fall. I suggest taking it all apart, cleaning, and greasing with dielectric grease.

I have a flickr album with some photos of the guts. I'll post up a link in a little while.

If found the album you're referring to in another post. I can't really see how the square button fits. I tried to turn the square button and it won't budge. It even made a faint "crack" sound so I immediately stopped. It's not broken yet. Not sure what to do now.

[Nessism]

Sorry, it's been way too many years for me to remember all the specific details on how to get that button off. If it won't rotate one way, try the other. One way or another, it will turn...

[danny01975]

Just to add an update.. I manage to find a new-old-stock OEM turn signal assembly on ebay. The exact one! I went ahead and bought it since either I will break this one trying to fix it, or it may eventually break and will only be harder to find in the future. At least now I have a backup plan.

[Big Block]

No need to break it. I take it the screws are undone that hold the little circuit board in? Try it one way and the other and it will come, it's probably dirty with old dialectric grease behind there. And yes make sure to catch the tiny ball bearings and spring. Good idea on buying the backup switch though, they are getting harder to find. Ha, ha. I went through the same on my 1100 last year. I ordered a new switch but in the mean time I fixed the old one and am still using it but I'm ready just in case....