Announcement

Collapse
No announcement yet.

Help with auxiliary lights wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help with auxiliary lights wiring

    Hello there! I've recently bought a set of aux light to my beloved G650 GS Sertao. It came with it's own relay and fuse, and also a switch. I would like to get some help with the wiring, more specially, I want to connect the light switch after the headlight relay, so it can be turned on only, after the bike has ignition. Can anyone help me, which one is the headlight relay, or any point on the bike, which is only has power after ignition, and has some avaliable contacts? Photos would be appreciated. Thank you in advanve!
    ...

    #2
    Welcome to the forum.

    Not sure what a Sertao is. But if you list the year and model, someone may provide a wiring diagram. Sadly, the 650 diagrams previously linked on BikeCliffs Website are dead ends in the links on the archived site in my signature. The service manuals there do have wiring diagrams in them near the end. To my knowledge, there are no wires that are hot only after the bike is running. There are many that are hit only when the ignition key is on.

    That said, many models have an extra 12v switched brown wire in the headlamp bucket not connected to anything. Ground to whatever is convenient. Black w/white stripe are grounds on all models. All other wire colors also tend to be the same across all years and models.
    Last edited by Rich82GS750TZ; 01-22-2025, 12:48 AM.
    Rich
    1982 GS 750TZ
    2015 Triumph Tiger 1200

    BikeCliff's / Charging System Sorted / Posting Pics
    Destroy-Rebuild 750T/ Destroy-Rebuild part deux

    Comment


      #3
      Tap into the headlight power wire and run your primary wire for the relay off that. It could only be turned on after the headlight is turned on (no wiring diagram needed)
      1980 Yamaha XS1100G (Current bike)
      1982 GS450txz (former bike)
      LONG list of previous bikes not listed here.

      I identify as a man but according to the label on a box of Stauffers Baked Lasagne I'm actually a family of four

      Comment


        #4
        Here is a video tutorial for you.

        Remember to seal all connections you make securely to avoid water penetration.

        I have many times used vinyl electrical tape double wrapped, but have come to like using a product called liquid electrical tape.
        Do not skimp with it and it will seal very well.

        Bertrand Russell: 'Men are born ignorant, not stupid. They are made stupid by education.'

        Comment


          #5
          To the best of my (limited) knowledge, no GS ever left the factory with a headlight relay.
          I ride many bikes.
          Some are even Suzukis. :D

          Comment


            #6
            Originally posted by Datsa Noydb View Post
            To the best of my (limited) knowledge, no GS ever left the factory with a headlight relay.
            It's a matter of how much power is flowing through whatever switch you're using. Big power requires a big switch, if you use a smaller switch the contacts inside the relay do the work of handling that larger power flow.
            1980 Yamaha XS1100G (Current bike)
            1982 GS450txz (former bike)
            LONG list of previous bikes not listed here.

            I identify as a man but according to the label on a box of Stauffers Baked Lasagne I'm actually a family of four

            Comment


              #7
              Very true, but has nothing to do with the fact that there won't be a headlight relay on the bike.
              I ride many bikes.
              Some are even Suzukis. :D

              Comment

              Working...
              X